Low End Mac Reader Specials

TypeStyler For Mac OS X is Now Shipping! Download The Free Fully Functional 60 Day Tryout at www.typestyler.com

Don't install Parallels to play poker online! Poker Mac will show you how to download and install a native Mac poker application such as Full Tilt Poker Mac.

Laptop Hardware Provided by TechRestore - Overnight Mac & iPod Repairs.

Compare products like desktop computers, apple laptops, apple macs, and LCD Monitors side by side! All the information and reviews to make the best purchasing decision for new mobile phones, sat nav systems, or MP3 players. The Ciao online shopping community makes searching products easy for you.

Mac Daniel's Advice

Adding a DIP Switch and Overclocking Sawtooth's Bus Speed

- 2005.11.30

title

Pertains to: Power Mac G4 Sawtooth and possibly Mystic/Gigabit Ethernet
Recommended tools: Low wattage (15W) grounded soldering iron
Recommended parts: 4 switch DIP switch

Adding a DIP switch so you can overclock the Sawtooth Power Mac G4 is a lot easier than you probably thought - there are already holes on the motherboard for mounting a DIP switch! Apple probably had DIP switches installed on the motherboards when they were designing them and deleted them in the production model in order to save money.

Proceed at your own risk- it's possible you will damage your motherboard.

Apple put tiny 0 ohm resistors on the underside of the motherboard instead. The motherboard needs to be removed and these resistors need to be removed. Removing the resistors isnn't difficult. I melted and removed some solder so that the resistor wasn't held on as well. I then used a razor blade to pop the resistor off.

You can also do it the standard way - melt the solder and then remove it with a sucker or de-soldering braid. Just make sure you don't lose that resistor. You don't want it attached to another part of the motherboard.

Also, don't splash solder on the motherboard. It's a ridiculously small amount of solder, but it could potentially damage or destroy your motherboard.

Installing the DIP switch is straightforward. The board uses a standard sized 4 switch DIP switch, so you simply place the pins through the holes and then fill the holes with solder. Install the DIP switch so that looking at the computer from the front, with the computer open, 1 is on the left and 4 is on the right. Here is what it looks like when it's done:

Here is the chart of the different bus speed settings (x=on):

   66 70 90 94.5 100 105 120 133
 1  x  -  x   -  x   -   x   -
 2  -  -  x   x   x   x   -  -
 3  x  x  x   x   -  -   -  -
 4  -  -  -  -  -  -   -  -

 1=R435, 2=R434, 3=R433, 4=R432

Note that 70 MHz, 105 MHz, and 133 MHz are in bold. These settings are apparently not supposed to be used under normal conditions. I have tried both 105 MHz and 133 MHz. 133 MHz results in 3 beeps with the power LED blinking 3 times. I believe that indicates a memory error. All of my memory is PC133, so I'm not exactly sure why it doesn't work. 105 MHz booted, but it seems to have resulted in loss of function of the USB ports, since my mouse and keyboard became unusable. I felt no reason to try 70 MHz.

That leaves 120 MHz as the only overclocking option.

It's also important to know that you will most likely need to change the multiplier on your CPU card. Those settings can be found at G4 Hardware Help. If you don't change the multiplier, a 350 MHz card will try to run at 420 MHz on a 120 MHz bus, a 400 MHz card at 480 MHz, a 450 MHz card at 540 MHz, and a 500 MHz card at 600 MHz.

My 533 MHz G4 would not run at 600 MHz until I boosted the L2 cache voltage. Any Apple OEM processor faster than 533 MHz when installed in a Sawtooth requires the CD ATA connector to be removed, modification to the heatsink or modification to the case to use the newer heatsink, and 12V to be spliced to one of the mount points of the new processor. That is why I chose the 533 MHz processor.

You will need PC133 memory, as PC100 will most likely not work reliably on a 120 MHz bus. Also, PCI speed is reduced slightly from 33 MHz to 30 MHz. This should have no effect unless you are using a RAID setup, Ultra320 SCSI, or some other PCI card that is actually faster than the PCI bus. Even then it may have little effect.

When I first did this mod, my 533 MHz processor card had a 4x multiplier (it was designed for the 133 MHz bus of the Digital Audio Power Mac G4). On the original 100 MHz bus, it ran at 400 MHz, and with the overclocked 120 MHz bus, it ran at 480 MHz.

I am using Mac OS X 10.3.5. After I installed the DIP switch and changed the settings, Apple System Profiler reported a 100 MHz bus and 400 MHz processor. I tried many different settings, and Apple System Profiler always reported 100 MHz bus and 400 MHz processor.

I then installed Linux. I tried many different settings, and Linux did the same thing. It always reported a 100 MHz bus and a 400 MHz processor. I was extremely disappointed. However, I benchmarked 4 different settings using XBench. Here are the results:

       266/66 400/100 480/120 600/120*
CPU     12.24  19.04   22.68   28.77
Memory   9.04  13.81   16.46   17.48

* required L2 cache voltage boost

I was ecstatic. All this time I thought the overclocking had failed, but in reality it was OS X and Linux which had failed to report the actual speeds.

Also, the data sheet where I got the info from had "0" represent a set jumper, and "1" represent no jumper set (beware - I think this is common), so at first I was trying all of the settings backwards. It's unfortunate that Apple System Profiler doesn't recognize the 120 MHz bus and actual speed of the processor on Sawtooth - but the bus overclock has successfully increased both CPU and memory speed.

It would be nice to get 133 MHz working, but I'm happy with 120 MHz. This modification will allow you to set Apple OEM processor cards that support an 8x multiplier to run at up to 960 MHz.

My system is extremely stable. If I ever learn more about the 133 MHz setting or why Linux and Mac OS X always report a 100 MHz bus speed, I will update this article.

All questions or comments are welcome. My email is psycopunkn@aol.com.

Link: G4 Hardware Help

Not sure if you should upgrade your old Mac or replace it? Check the Mac Daniel index to see if we've already addressed your problem.

Recent Mac Daniel columns

WiFi Hardware Compatible with Desktop Macs Running OS X, MetaPhyzx, 03.11. USB, ethernet, PCI, and other wireless hardware compatible with Mac OS X.
WiFi CardBus Adapters Compatible with PowerBooks, MetaPhyzx, 03.11. CardBus hardware and drivers compatible with PowerBooks running Mac OS X.
WiFi PC Cards Compatible with PowerBooks Running OS X, MetaPhyzx, 03.11. PCMCIA/PC Card hardware and drivers compatible with PowerBooks running Mac OS X.
WiFi PC Cards for PowerBooks Running Mac OS 9, MetaPhyzx, 03.10. PCMCIA cards and drivers reported to be compatible with PowerBook running the Classic Mac OS.
More in the Mac Daniel index.

Links for the Day

Mac of the Day: 17" MacBook Pro Core Duo, Apr. 2006 - The top-end MacBook Pro includes a 1680 x 1050, 2.16 GHz Core Duo CPU, and supports Apple 30" Cinema Display.
Group of the Day: G4 List is for those using Power Mac G4s or G4 upgrades.
November 24 in LEM history: 98: Microsoft's heavy hand - 00: Looking at the iMac - 04: The best Mac for the holidays - Picking the right replacement for a dead mouse - Better battery for 15" AlBook
Support Low End Mac

Recent Deals

Best G4 iMac Deals, 11.24. Used 15" 700 MHz CD-RW, $150; 800 MHz Combo, $229; 1 GHz, $289; 17" 1.25 GHz, $200; 20" 1.25 GHz, $509.
Best MacBook Air Deals, 11.24. Used from $899; refurb from $1,099; new 1.6 GHz/120 HD, $1,150 after rebate; 1.8/64 SSD, $1,150 a/r; 1.86/128 SSD, $1,350 a/r; 2.13/128 SSD, $1,694 a/r.
Best PowerBook G3 Deals, 11.24. Used 233 MHz WallStreet, $75; 266 MHz, $160; 400 MHz Lombard, $199; 400 MHz Pismo, $289; 500 MHz, $350.
Best 12" PowerBook G4 Deals, 11.23. Used 867 MHz SuperDrive, $348; 1 GHz Combo, $379; SD, $519; 1.33 GHz, $529; 1.5 GHz Combo, $549; SuperDrive, $609.
Best Mac Pro Deals, 11.23. Used 2.66 GHz 4-core, $1,300; 3.0 4-core. $1,919; refurb 2.66 4-core Nehalem, $2,149; 2.93, $2,549; 2.93 8-core, $4,999; new 2.26 8-core, $2,290.
Best Time Capsule and AirPort Deals, 11.23. Used 802.11g AirPort Extreme, $49; 500 GB Time Capsule, $150; new, $190; 1 TB dual-band, $280; 2 TB, $469; 802.11n AirPort Extreme, $170.
Best eMac Deals, 11.18. Used 1 GHz Combo, $100; SuperDrive, $269; 1.25 GHz Combo, $119; SD, $319; 1.42 GHz Combo, $289; SD, $498.
Best Mac OS X 10.6 and Mac Box Set Deals, 11.18. "Snow Leopard", single user, $25; 5 users, $45; Mac Box Set, single user, $139; 5 users, $180; Server, $414. Shipping included.
Best Xserve Deals, 11.18. Used 1 GHz dual G4, $649; 2.3 dual G5, $795; 3.0 4-core Xeon, $1,899; refurb 2.26 4-core, $2,499; new, $2,888; refurb 8-core, $2,999; new, $3,449; more.
More deals in our archive.

About LEM | Support | Usage | Privacy | Contacts

Entire Low End Mac website copyright ©1997-2009 by Cobweb Publishing, Inc., unless otherwise noted. All rights reserved. Advice presented in good faith, but what works for one may not work for all. Please report errors to .
LINKS: We allow and encourage links to any public page as long as the linked page does not appear within a frame that prevents bookmarking it.
Access our RSS news feed at http://lowendmac.com/feed.xml.
Email may be published at our discretion; email addresses will not be published without permission, and we will encrypt them in hopes of avoiding spammers. If you prefer your message not be published, mark it "not for publication." Letters may be edited for length, context, and to match house style.
PRIVACY: We don't collect personal information unless you explicitly provide it. For more details, see our Terms of Use.
Low End Mac is an independent publication and has not been authorized, sponsored, or otherwise approved by Apple Inc. Apple, the Apple logo, Macintosh, iBook, iMac, eMac, iPod, iPhone, PowerBook, MacBook, MagSafe, Mac Pro, Apple TV, and AirPort are registered trademarks of Apple Inc. Additional company and product names may be trademarks or registered trademarks and are hereby acknowledged.