Mac Daniel's Advice

Overclocking the Blue and White G3

Low End Mac Reader Specials

Memory To Go Special: MacPro 8 Core 8GB kit $232 / 4GB kit $116 / 2GB kit $72. New Macbook 2GB DDR3-$65. HARD DRIVES available -- Free shipping / LIfetime warranty.

Download Typestyler, still the Ultimate Styling Tool for Internet, Print and Video Graphics. Works great in Classic with a Native OS X Version on the way. Free Tryout: www.typestyler.com

LA Computer Company: Specials on AppleCare, iMac's, Apple Batteries and Apple A/C Adapters. Also Great prices on Used Apple Computers. Call 1-800-941-7654 Click Here.

Mac users can finally play Party Poker for Mac. Not only that, they can also learn how to play PokerStars for Mac.

Laptop Hardware Provided by TechRestore - Overnight Mac & iPod Repairs.

Compare products like desktop computers, laptops, and LCD TVs side by side! All the information and reviews to make the best purchasing decision for a new cell phone GPS products or MP3 players. The Ciao network makes searching products easy for you.

Evan Kleiman - 2002.07.10

Last time we discussed overclocking your Macintosh, but we never really got into the nitty-gritty of actually changing the settings inside your computer, since this can be come a very complicated thing to do. This time we're finally going to get into it and actually do some over clocking.

Today we'll be learning how to overclock a Blue and White (b&w) Power Macintosh G3 (a.k.a. Yosemite).

The b&w G3 is, in my opinion, one of the easiest computers to overclock. Why? Because the b&w has a jumper block (we'll get more into what this is later) right next to the processor! In fact, the jumper block is even labeled "speed control" on the motherboard. Imagine that!

How exactly do you do this "overclocking" thing? If you read the previous article, you already Yosemite designknow what it is, but now we'll go over how to do it. This will require you to open up your G3, so you should follow the normal precautions and always remember that you have the potential to mess up your computer big time.

With all that said and done, it's now time to open your computer. First, disconnect all of the miscellaneous power cables, etc. from the back of your computer. Now, you can safely go ahead and open it up, which is done by grabbing the little circle on the right hand side of the computer and pulling - the whole side should come down, and you should see (and have access to) the entire motherboard and drive assembly.

Now locate the processor. It's the thing with all of the aluminum bits sticking out of it. This is called the "heat sink," and what it does is take extra heat away from the processor.

Next to the processor is a little rectangle box. It should be a shade of baby blue, and it will (unless you or someone else has previously been inside of the computer) be covered by a sticker that says "do not remove, will void warranty" or something of the like. See Accelerate Your Mac for a nice photo.

This is a cover for the jumper block. A jumper block is a device attached to the motherboard that you can use to change settings. (Not necessarily just speed settings. If you'll notice, all IDE hard drives have jumpers, to control settings for master/slave, etc. But, that's a bit off topic here.)

Now that we know what a jumper block is and what it does, it's time to change some settings (finally!). First, remove the tape (if it's still there). Next, remove the block cover. You should now see exactly eleven rows of two pins each. This is what controls the systems various speed settings.

This works by placing jumpers on various rows in the box. It just looks empty now because the box you took off also contains the jumpers. You won't be able to reuse this cover, because it's preset for your current speed settings - the thing we'll be changing.

You'll need to buy new jumpers. All you'll need to do is head over to your local Radio Shack and ask for part number #276-1512a (according to Accelerate Your Mac). They'll know what it is, and it'll only cost you about two bucks.

Once you've got the new jumpers, it's time to set it all up! Looking at the top of the jumper block, you'll only be changing the first four groups of pins. The other ones will be kept the same.

You can start by choosing the speed you wish to "jump" to (ha-ha, like the pun?). You shouldn't add more than 50 to 100 MHz, since instability and other problems can occur.

Now that you have that decided what speed to try, you need to fill in the proper jumpers. Looking at the jumper block, with the open end facing you, put a jumper in the third, fourth, sixth, and seventh closest set from you. These control the bus setting and will not be changed regardless of which speed you'll be going to.

Next, you need to change the upper four jumpers. If you wish to set your processor to 350 MHz, insert a jumper on the uppermost set. If you wish to bump your processor to 400 MHz, insert one on the first and third jumper sets. If you wish to over clock to 450 MHz, insert a jumper on the fourth (farthest from you) set. And to try the 500 MHz speed, insert a jumper on the third set of pins.

  CPU Speeds Listed Assume 100 MHz (default) Bus Speed

    (S = Jumper present or "Set", " " = no jumper)

            Multiple     | 4 | 3 | 2 | 1 |
            - -----------+---+---+---+---+
            3x   300 MHz |   | S | S | S |
            - -----------+---+---+---+---+
            3.5x 350 MHz |   |   |   | S |
            - -----------+---+---+---+---+
            4x   400 MHz |   | S |   | S |
            - -----------+---+---+---+---+
            4.5x 450 MHz | S |   |   |   |
            - -----------+---+---+---+---+
            5x   500 MHz |   | S |   |   |
            - -----------+---+---+---+---+

    Above table excerpted from Accelerate Your Mac.

Simple enough? I hope so, because now you're done! All you need to do is close up your computer, attach your cables, and get back to business!

You will want to test your overclocked G3 to make sure it's stable by running the computer for several hours with the case closed. Too much heat can make the CPU unstable, meaning you'll need to step back 50 MHz and try again. Keep in mind that overclocking will not always be successful; you may end up back at your original CPU speed.

If you ever need more information, you can check out my two favorite resources, Accelerate Your Mac! and Bare Feats!

In the end, all you spend was about two or three dollars, and about twenty minutes of your time, to get a large enough speed bump to definitely see a difference in many daily computing chores! So, get out there and start over clocking!

Not sure if you should upgrade your old Mac or replace it? Check the Mac Daniel index to see if we've already addressed your problem.

Recent Mac Daniel columns

Links for the Day

Recent Content on Low End Mac

Recent Deals

About LEM | Support | Usage | Privacy | Contacts

Entire Low End Mac website copyright ©1997-2009 by Cobweb Publishing, Inc., unless otherwise noted. All rights reserved. Advice presented in good faith, but what works for one may not work for all. Please report errors to .
  LINKS: We allow and encourage links to any public page as long as the linked page does not appear within a frame that prevents bookmarking it.
  Access our RSS news feed at http://lowendmac.com/feed.xml.
  Email may be published at our discretion; email addresses will not be published without permission, and we will encrypt them in hopes of avoiding spammers. If you prefer your message not be published, mark it "not for publication." Letters may be edited for length, context, and to match house style.
  PRIVACY: We don't collect personal information unless you explicitly provide it. For more details, see our Terms of Use.
  Low End Mac is an independent publication and has not been authorized, sponsored, or otherwise approved by Apple Inc. Apple, the Apple logo, Macintosh, iBook, iMac, eMac, iPod, iPhone, PowerBook, MacBook, MagSafe, Mac Pro, Apple TV, and AirPort are registered trademarks of Apple Inc. Additional company and product names may be trademarks or registered trademarks and are hereby acknowledged.


Have a question?
Ask an expert!

Navigation

Used Mac Dealers
Apple History
Video Cards
Email Lists
InfoMac's Low
End Mac Forum

Favorite Sites

MacSurfer
MacMinute
MacInTouch
MyAppleMenu
InfoMac
Macs Only!
The Mac Observer
Accelerate Your Mac
RetroMacCast
PB Central
MacWindows
The Vintage Mac
   Museum
DealMac
DealsOnTheWeb
Mac2Sell
ramseeker
Mac Driver Museum
JAG's House
System 6 Heaven
System 7 Today
the pickle's Low-End
   Mac FAQ
Abandonware
   Petition
Mac vs. PC Info

Affiliates

The Apple Store
Mac Connection
MacMall
TechRestore
MacResQ
ExperCom
Crucial Memory
batteries.com

Advertise

All of our advertising is handled by BackBeat Media. For price quotes and advertising information, please contact at BackBeat Media (646-546-5194). This number is for advertising only.

Open Link

Problems viewing this page with Internet Explorer 5.5 or 6? It works fine in other browsers, including IE 7. We recommend Firefox for those using Windows, as it is standards based and more secure than IE 6 (and earlier). More LEM visitors use Firefox than any other browser.